Texas Instruments
TLV2548MPWREP
TLV2548MPWREP
Regular price
$7.35 USD
Regular price
Sale price
$7.35 USD
Unit price
per
Couldn't load pickup availability
TLV2548MPWREP Texas Instruments - Yeehing Electronics
Enhanced Product 2-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch
Pricing (USD)
| Quantity | Unit Price |
| 1 — 99 | 17.432 |
| 100 — 249 | 15.226 |
| 250 — 999 | 11.74 |
| 1,000 + | 7.35 |
The above prices are for reference only.
Specifications
| Manufacturer | Analog Devices Inc. |
| Product Category | Analog to Digital Converters - ADC |
| RoHS | N |
| Series | ADADC71 |
| Mounting Style | Through Hole |
| Package / Case | CDIP-32 |
| Resolution | 16 bit |
| Number of Channels | 1 Channel |
| Sampling Rate | 20 kS/s |
| Input Type | Single-Ended |
| Interface Type | Parallel |
| Architecture | SAR |
| Reference Type | Internal |
| Minimum Operating Temperature | 0 C |
| Maximum Operating Temperature | + 70 C |
| Packaging | Bulk |
| Height | 5.08 mm |
| Input Voltage | 5 V/10 V/20 V, n++2.5 V/n++5 V/n++10 V |
| Length | 43.89 mm |
| Number of Converters | 1 Converter |
| Power Consumption | 645 mW |
| Width | 27.99 mm |
| Brand | Analog Devices |
| Gain Error | +/- 0.2 %FSR |
| Number of ADC Inputs | 1 Input |
| Operating Supply Voltage | 5 V, 15 V |
| Pd - Power Dissipation | 850 mW |
| Product Type | ADCs - Analog to Digital Converters |
| Sample and Hold | No |
| Factory Pack Quantity | 1 |
| Subcategory | Data Converter ICs |
For more information, please refer to datasheet
Documents
| TLV2548MPWREP Datasheet |
More Information
The TLV2548 is a high performance, 12-bit low-power, 3.86-µs, CMOS analog-to-digital converter (ADC) which operates from a single 3.0-V to 5.5-V power supply. This device has three digital inputs and a 3-state output [chip select (CS), serial input-output clock (SCLK), serial data input (SDI), and serial data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a TI DSP, a frame sync (FS) signal is used to indicate the start of a serial data frame.
