DS3668N/NOPB Texas Instruments - Yeehing Electronics

Quad fault protected peripheral driver

Pricing (USD)

Quantity	Unit Price
1 — 99	2.648
100 — 249	2.32
250 — 999	1.627
1,000 +	0.92

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Motor / Motion / Ignition Controllers & Drivers
RoHS	Y
Operating Supply Voltage	7 V
Output Current	600 mA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C
Mounting Style	Through Hole
Package / Case	PDIP-16
Packaging	Tube
Number of Outputs	4 Output
Operating Temperature Range	- 40 C to + 125 C
Output Voltage	70 V
Series	DS3668
Brand	Texas Instruments
Pd - Power Dissipation	2075 mW
Product Type	Motor / Motion / Ignition Controllers & Drivers
Factory Pack Quantity	25
Subcategory	PMIC - Power Management ICs
Unit Weight	0.037172 oz

For more information, please refer to datasheet

Documents

DS3668N/NOPB Datasheet

More Information

The DS3668 quad peripheral driver is designed for those applications where low operating power, high breakdown voltage, high output current and low output ON voltage are required. Unlike most peripheral drivers available, a unique fault protected circuit is incorporated on each output. When the load current exceeds 1.0A (approximately) on any output for more than a built-in delay time, nominally 12 µs, that output will be shut off by its protection circuitry with no effect on other outputs. This condition will prevail until that protection circuitry is reset by toggling the corresponding input or the enable pin low for at least 1.0 µs. This built-in delay is provided to ensure that the protection circuitry is not triggered by turn-on surge currents associated with certain kinds of loads.