Texas Instruments
DS90C383BMTX/NOPB
DS90C383BMTX/NOPB
Couldn't load pickup availability
DS90C383BMTX/NOPB Texas Instruments - Yeehing Electronics
+3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-65 MHz
Pricing (USD)
| Quantity | Unit Price |
| 1 — 99 | 3.303 |
| 100 — 249 | 2.693 |
| 250 — 999 | 2.116 |
| 1,000 + | 1.26 |
The above prices are for reference only.
Specifications
| Manufacturer | Texas Instruments |
| Product Category | LVDS Interface IC |
| RoHS | Y |
| Type | LVDS |
| Number of Drivers | 4 Driver |
| Number of Receivers | 28 Receiver |
| Data Rate | 455 Mb/s |
| Input Type | CMOS, TTL |
| Supply Voltage - Max | 3.6 V |
| Supply Voltage - Min | 3 V |
| Minimum Operating Temperature | - 10 C |
| Maximum Operating Temperature | + 70 C |
| Mounting Style | SMD/SMT |
| Package / Case | TSSOP-56 |
| Packaging | Reel |
| Height | 0.9 mm |
| Input Voltage MAX | 2 V |
| Length | 14 mm |
| Series | DS90C383B |
| Width | 6.1 mm |
| Brand | Texas Instruments |
| Input Voltage MIN | 0.8 V |
| Maximum Output Voltage | 0.45 V |
| Moisture Sensitive | Yes |
| Operating Supply Voltage | 3.3 V |
| Pd - Power Dissipation | 1630 mW |
| Product Type | LVDS Interface IC |
| Factory Pack Quantity | 1000 |
| Subcategory | Interface ICs |
| Unit Weight | 0.026103 oz |
For more information, please refer to datasheet
Documents
| DS90C383BMTX/NOPB Datasheet |
More Information
The DS90C383B transmitter converts 28 bits of CMOS/TTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. At a transmit clock frequency of 65 MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughput is 227 Mbytes/sec. The DS90C383B transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge or Falling edge strobe transmitter will interoperate with a Falling edge strobe Receiver (DS90CF386) without any translation logic.
