DS90CF364MTDX/NOPB


YeeHing #: Y007-DS90CF364MTDX/NOPB
Inventory: 7000

Feel free to reach out to us for more information.
Click the button below to unveil exclusive discounts and delightful surprises.

Description

DS90CF364MTDX/NOPB Texas Instruments - Yeehing Electronics

+3.3V LVDS Receiver 18-Bit Flat Panel Display (FPD) Link - 65 MHz

Pricing (USD)

Quantity Unit Price
1 — 99 3.945
100 — 249 3.457
250 — 999 2.424
1,000 + 1.37

The above prices are for reference only.

Specifications

Manufacturer Texas Instruments
Product Category LVDS Interface IC
RoHS Y
Type CMOS, TTL
Number of Drivers 21 Driver
Number of Receivers 3 Receiver
Data Rate 1300 Mb/s
Input Type LVDS
Supply Voltage - Max 3.6 V
Supply Voltage - Min 3 V
Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C
Mounting Style SMD/SMT
Package / Case TSSOP-48
Packaging Reel
Height 0.9 mm
Input Voltage MAX 100 mV
Length 12.5 mm
Series DS90CF364
Width 6.1 mm
Brand Texas Instruments
Input Voltage MIN - 100 mV
Maximum Output Voltage 450 mV
Moisture Sensitive Yes
Operating Supply Voltage 3.3 V
Pd - Power Dissipation 1.89 W
Product Type LVDS Interface IC
Factory Pack Quantity 1000
Subcategory Interface ICs
Unit Weight 0.007055 oz

For more information, please refer to datasheet

Documents

DS90CF364MTDX/NOPB Datasheet

More Information

The DS90C363 transmitter converts 21 bits of CMOS/TTL data into three LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fourth LVDS link. Every cycle of the transmit clock 21 bits of input data are sampled and transmitted. The DS90CF364 receiver converts the LVDS data streams back into 21 bits of CMOS/TTL data. At a transmit clock frequency of 65 MHz, 18 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughput is 170 Mbyte/sec. The Transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The Transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge Transmitter will inter-operate with a Falling edge Receiver (DS90CF364) without any translation logic.

You may also like

Recently viewed