DS90CF384MTDX/NOPB


YeeHing #: Y007-DS90CF384MTDX/NOPB
Inventory: 5200

Feel free to reach out to us for more information.
Click the button below to unveil exclusive discounts and delightful surprises.

Description

DS90CF384MTDX/NOPB Texas Instruments - Yeehing Electronics

+3.3V LVDS Receiver 24-Bit Flat Panel Display (FPD) Link-65 MHz

Pricing (USD)

Quantity Unit Price
1 — 99 4.081
100 — 249 3.327
250 — 999 2.615
1,000 + 1.55

The above prices are for reference only.

Specifications

Manufacturer Texas Instruments
Product Category LVDS Interface IC
RoHS Y
Type LVCMOS, LVTTL
Number of Drivers 28 Driver
Number of Receivers 4 Receiver
Data Rate 1800 Mb/s
Input Type LVDS
Supply Voltage - Max 3.6 V
Supply Voltage - Min 3 V
Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C
Mounting Style SMD/SMT
Package / Case TSSOP-56
Packaging Reel
Height 0.9 mm
Input Voltage MAX 100 mV
Length 14 mm
Series DS90CF384
Width 6.1 mm
Brand Texas Instruments
Input Voltage MIN - 100 mV
Maximum Output Voltage 450 mV
Moisture Sensitive Yes
Operating Supply Voltage 3.3 V
Pd - Power Dissipation 1.61 W
Product Type LVDS Interface IC
Factory Pack Quantity 1000
Subcategory Interface ICs
Unit Weight 0.026103 oz

For more information, please refer to datasheet

Documents

DS90CF384MTDX/NOPB Datasheet

More Information

The DS90C383 transmitter converts 28 bits of CMOS/TTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. The DS90CF384 receiver converts the LVDS data streams back into 28 bits of CMOS/TTL data. At a transmit clock frequency of 65 MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughputs is 227 Mbytes/sec. The transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge transmitter will inter-operate with a Falling edge receiver (DS90CF384) without any translation logic. The DS90CF384 is also offered in 64 ball, 0.8mm fine pitch ball grid array(FBGA) package which provides a 44 % reduction in PCB footprint (available Q3, 1999).

You may also like

Recently viewed