LM2737MTCX/NOPB Texas Instruments - Yeehing Electronics

2.2-V to 16-V, 2-MHz, N-channel FET synchronous buck controller with over and undervoltage flag

Pricing (USD)

Quantity	Unit Price
1 — 99	1.355
100 — 249	1.119
250 — 999	0.804
1,000 +	0.35

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Switching Controllers
RoHS	Y
Number of Outputs	1 Output
Switching Frequency	600 kHz
Input Voltage	2.2 V to 16 V
Output Voltage	0.6 V to 5 V
Output Current	20 A
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C
Mounting Style	SMD/SMT
Package / Case	TSSOP-14
Packaging	Reel
Operating Temperature Range	- 40 C to + 125 C
Output Power	12 W
Series	LM2737
Type	Synchronous Buck Controller
Brand	Texas Instruments
Operating Supply Current	1.5 mA
Product Type	Switching Controllers
Factory Pack Quantity	2500
Subcategory	PMIC - Power Management ICs
Unit Weight	0.002078 oz

For more information, please refer to datasheet

Documents

LM2737MTCX/NOPB Datasheet

More Information

The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers. They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. The LM2727 employs output over-voltage and under-voltage latch-off. For applications where latch-off is not desired, the LM2737 can be used. Power up and down sequencing is achieved with the power-good flag, adjustable soft-start and output enable features. The LM2737 and LM2737 operate from a low-current 5V bias and can convert from a 2.2V to 16V power rail. Both parts utilize a fixed-frequency, voltage-mode, PWM control architecture and the switching frequency is adjustable from 50kHz to 2MHz by adjusting the value of an external resistor. Current limit is achieved by monitoring the voltage drop across the on-resistance of the low-side MOSFET, which enhances low duty-cycle operation. The wide range of operating frequencies gives the power supply designer the flexibility to fine-tune component size, cost, noise and efficiency. The adaptive, non-overlapping MOSFET gate-drivers and high-side bootstrap structure helps to further maximize efficiency. The high-side power FET drain voltage can be from 2.2V to 16V and the output voltage is adjustable down to 0.6V.