Description
LM2902KAVMPWREP Texas Instruments - Yeehing Electronics
HiRel Enhanced Product, quad, 26-V, 1.2-MHz operational amplifier
Pricing (USD)
| Quantity | Unit Price |
| 1 — 99 | 1.801 |
| 100 — 249 | 1.487 |
| 250 — 999 | 1.069 |
| 1,000 + | 0.56 |
The above prices are for reference only.
Specifications
| Manufacturer | Texas Instruments |
| Product Category | Operational Amplifiers - Op Amps |
| RoHS | Y |
| Mounting Style | SMD/SMT |
| Package / Case | TSSOP-14 |
| Supply Voltage - Max | 32 V |
| Output Current per Channel | 30 mA |
| Number of Channels | 4 Channel |
| GBP - Gain Bandwidth Product | 1.2 MHz |
| SR - Slew Rate | 0.5 V/us |
| CMRR - Common Mode Rejection Ratio | 50 dB to 80 dB |
| Ib - Input Bias Current | 250 nA |
| Vos - Input Offset Voltage | 7 mV |
| Supply Voltage - Min | 3 V |
| Operating Supply Current | 175 uA |
| Minimum Operating Temperature | - 55 C |
| Maximum Operating Temperature | + 125 C |
| Shutdown | No Shutdown |
| Series | LM2902-EP |
| Packaging | Reel |
| Amplifier Type | High Gain Amplifier |
| Features | Standard Amps |
| Height | 1.15 mm |
| Input Type | Rail-to-Rail |
| Length | 5 mm |
| Product | Operational Amplifiers |
| Supply Type | Single, Dual |
| Technology | Bipolar |
| Width | 4.4 mm |
| Brand | Texas Instruments |
| Dual Supply Voltage | +/- 3 V, +/- 5 V, +/- 9 V |
| en - Input Voltage Noise Density | 35 nV/sqrt Hz |
| Maximum Dual Supply Voltage | +/- 16 V |
| Minimum Dual Supply Voltage | +/- 1.5 V |
| Operating Supply Voltage | 3 V to 32 V, +/- 1.5 V to +/- 16 V |
| Product Type | Op Amps - Operational Amplifiers |
| Factory Pack Quantity | 2000 |
| Subcategory | Amplifier ICs |
| Vcm - Common Mode Voltage | Negative Rail to Positive Rail - 1.5 V |
| Voltage Gain dB | 100 dB |
| Part # Aliases | V62/06622-04XE |
| Unit Weight | 0.002018 oz |
For more information, please refer to datasheet
Documents
| LM2902KAVMPWREP Datasheet |
More Information
This device consists of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices) and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
