LMC6035IMM/NOPB Texas Instruments - Yeehing Electronics

Dual, 15.5-V, 1.4-MHz operational amplifier

Pricing (USD)

Quantity	Unit Price
1 — 99	1.581
100 — 249	1.306
250 — 999	0.938
1,000 +	0.49

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Operational Amplifiers - Op Amps
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	VSSOP-8
Supply Voltage - Max	15.5 V
Output Current per Channel	4 mA
Number of Channels	2 Channel
GBP - Gain Bandwidth Product	1.4 MHz
SR - Slew Rate	1.5 V/us
CMRR - Common Mode Rejection Ratio	63 dB to 96 dB
Ib - Input Bias Current	200 fA
Vos - Input Offset Voltage	5 mV
Supply Voltage - Min	2 V
Operating Supply Current	400 uA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C
Shutdown	No Shutdown
Series	LMC6035
Packaging	Reel
Features	Small Size
Height	0.86 mm
Input Type	Rail-to-Rail
Length	3 mm
Output Type	Rail-to-Rail
Product	Operational Amplifiers
Supply Type	Single
Technology	CMOS
Width	3 mm
Brand	Texas Instruments
en - Input Voltage Noise Density	27 nV/sqrt Hz
In - Input Noise Current Density	0.0002 pA/sqrt Hz
Operating Supply Voltage	3 V, 5 V, 9 V, 12 V, 15 V
Product Type	Op Amps - Operational Amplifiers
PSRR - Power Supply Rejection Ratio	63 dB
Factory Pack Quantity	1000
Subcategory	Amplifier ICs
Voltage Gain dB	126.02 dB
Unit Weight	0.000935 oz

For more information, please refer to datasheet

Documents

LMC6035IMM/NOPB Datasheet

More Information

The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its ensured 2.7V operation. This provides a “comfort zone” for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems.