Description
LMC6035IMXQ1 Texas Instruments - Yeehing Electronics
Automotive-grade, dual, 15.5-V, 1.4-MHz operational amplifier
Pricing (USD)
Quantity | Unit Price |
1 — 99 | 1.555 |
100 — 249 | 1.284 |
250 — 999 | 0.922 |
1,000 + | 0.49 |
The above prices are for reference only.
Specifications
Manufacturer | Texas Instruments |
Product Category | Operational Amplifiers - Op Amps |
RoHS | Y |
Mounting Style | SMD/SMT |
Package / Case | SOIC-8 |
Output Current per Channel | 3 mA |
Number of Channels | 2 Channel |
GBP - Gain Bandwidth Product | 1.4 MHz |
SR - Slew Rate | 1.5 V/us |
CMRR - Common Mode Rejection Ratio | 63 dB to 96 dB |
Ib - Input Bias Current | 200 fA |
Vos - Input Offset Voltage | 5 mV |
Operating Supply Current | 400 uA |
Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C |
Shutdown | No Shutdown |
Series | LMC6035-Q1 |
Qualification | AEC-Q100 |
Packaging | Reel |
Amplifier Type | CMOS Amplifier |
Input Type | Rail-to-Rail |
Output Type | Rail-to-Rail |
Product | Operational Amplifiers |
Supply Type | Single |
Technology | CMOS |
Brand | Texas Instruments |
en - Input Voltage Noise Density | 27 nV/sqrt Hz |
Operating Supply Voltage | 2 V to 15.5 V |
Product Type | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio | 93 dB |
Factory Pack Quantity | 2500 |
Subcategory | Amplifier ICs |
Voltage Gain dB | 126 dB |
Unit Weight | 0.002677 oz |
For more information, please refer to datasheet
Documents
LMC6035IMXQ1 Datasheet |
More Information
The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its ensured 2.7V operation. This provides a “comfort zone” for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems.