Description
SN65LBC031DG4 Texas Instruments - Yeehing Electronics
High-Speed Controller Area Network (CAN) Transceiver
Pricing (USD)
Quantity | Unit Price |
1 — 99 | 4.525 |
100 — 249 | 3.689 |
250 — 999 | 2.899 |
1,000 + | 1.72 |
The above prices are for reference only.
Specifications
Manufacturer | Texas Instruments |
Product Category | CAN Interface IC |
RoHS | Y |
Mounting Style | SMD/SMT |
Package / Case | SOIC-8 |
Series | SN65LBC031 |
Type | CAN Controller |
Data Rate | 500 kb/s |
Supply Voltage - Max | 5.5 V |
Supply Voltage - Min | 4.5 V |
Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C |
Packaging | Reel |
Product | CAN Transceivers |
Brand | Texas Instruments |
Number of Transceivers | 1 |
Operating Supply Voltage | 5 V |
Product Type | CAN Interface IC |
Protocol Supported | CAN |
Factory Pack Quantity | 75 |
Subcategory | Interface ICs |
Unit Weight | 0.002677 oz |
For more information, please refer to datasheet
Documents
SN65LBC031DG4 Datasheet |
More Information
The SN75LBC031 is a CAN transceiver used as an interface between a CAN controller and the physical bus for high speed applications of up to 500 kBaud. The device provides transmit capability to the differential bus and differential receive capability to the controller. The transmitter outputs (CANH and CANL), feature internal transition regulation to provide controlled symmetry resulting in low EMI emissions. Both transmitter outputs are fully protected against battery short circuits and electrical transients that can occur on the bus lines. In the event of excessive device power dissipation the output drivers are disabled by the thermal shutdown circuitry at a junction temperature of approximately 160°C. The inclusion of an internal pullup resistor on the transmitter input ensures a defined output during power up and protocol controller reset. For normal operation at 500 kBaud the ASC terminal is open or tied to GND. For slower speed operation at 125 kBaud the bus output transition times can be increased to reduce EMI by connecting the ASC terminal to VCC. The receiver includes an integrated filter that suppresses the signal into pulses less than 30 ns wide.