SN65LBC031QD Texas Instruments - Yeehing Electronics

High-Speed Controller Area Network (CAN) Transceiver

Pricing (USD)

Quantity	Unit Price
1 — 99	4.642
100 — 249	3.785
250 — 999	2.975
1,000 +	1.77

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	CAN Interface IC
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	SOIC-8
Series	SN65LBC031Q
Type	CAN Controller
Data Rate	500 kb/s
Number of Drivers	1 Driver
Number of Receivers	1 Receiver
Supply Voltage - Max	5.5 V
Supply Voltage - Min	4.5 V
Operating Supply Current	80 mA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C
Packaging	Reel
Product	CAN Transceivers
Brand	Texas Instruments
Interface Type	CAN
Number of Channels	1 Channel
Number of Transceivers	1
Operating Supply Voltage	5 V
Pd - Power Dissipation	725 mW
Product Type	CAN Interface IC
Propagation Delay Time	90 ns
Protocol Supported	CAN
Factory Pack Quantity	2500
Subcategory	Interface ICs
Unit Weight	0.002561 oz

For more information, please refer to datasheet

Documents

SN65LBC031QD Datasheet

More Information

The SN75LBC031 is a CAN transceiver used as an interface between a CAN controller and the physical bus for high speed applications of up to 500 kBaud. The device provides transmit capability to the differential bus and differential receive capability to the controller. The transmitter outputs (CANH and CANL), feature internal transition regulation to provide controlled symmetry resulting in low EMI emissions. Both transmitter outputs are fully protected against battery short circuits and electrical transients that can occur on the bus lines. In the event of excessive device power dissipation the output drivers are disabled by the thermal shutdown circuitry at a junction temperature of approximately 160°C. The inclusion of an internal pullup resistor on the transmitter input ensures a defined output during power up and protocol controller reset. For normal operation at 500 kBaud the ASC terminal is open or tied to GND. For slower speed operation at 125 kBaud the bus output transition times can be increased to reduce EMI by connecting the ASC terminal to VCC. The receiver includes an integrated filter that suppresses the signal into pulses less than 30 ns wide.