SN74LS156NSR Texas Instruments - Yeehing Electronics

Dual 2-Line to 4-Line Decoders/Demultiplexers with Open-Collector Outputs

Pricing (USD)

Quantity	Unit Price
1 — 99	0.803
100 — 249	0.618
250 — 999	0.455
1,000 +	0.26

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Encoders, Decoders, Multiplexers & Demultiplexers
RoHS	Y
Product	Decoders / Demultiplexers
Logic Family	LS
Number of Input Lines	2 Input
Number of Output Lines	4 Output
Propagation Delay Time	27 ns
Supply Voltage - Min	4.75 V
Supply Voltage - Max	5.25 V
Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C
Mounting Style	SMD/SMT
Package / Case	SO-16
Packaging	Reel
Function	Decoder/Demultiplexer
Height	1.95 mm
Length	10.3 mm
Number of Circuits	Dual
Operating Temperature Range	0 C to + 70 C
Series	SN74LS156
Technology	Bipolar
Width	5.3 mm
Brand	Texas Instruments
Logic Type	Decoders/Demultiplexers
Supply Current - Max	6.1 mA
High Level Output Current	- 0.1 mA
Low Level Output Current	8 mA
Maximum Clock Frequency	35 MHz
Operating Supply Voltage	5 V
Product Type	Encoders, Decoders, Multiplexers & Demultiplexers
Factory Pack Quantity	2000
Subcategory	Logic ICs
Unit Weight	0.007079 oz

For more information, please refer to datasheet

Documents

SN74LS156NSR Datasheet

More Information

These monolithic transistor-transistor-logic (TTL) circuits feature dual 1-line-to-4-line demultiplexers with individual strobes and common binary-address inputs in a single 16-pin package. When both sections are enabled by the strobes, the common binary-address inputs sequentially select and route associated input data to the appropriate output of each section. The individual strobes permit activating or inhibiting each of the 4-bit sections as desired. Data applied to input 1C is inverted at its outputs and data applied at 2C is not inverted through its outputs. The inverter following the 1C data input permits use as a 3-to-8-line decoder or 1-to-8-line demultiplexer without external gating. Input clamping diodes are provided on all of these circuits to minimize transmission-line effects and simplify system design.