TLV2422AID Texas Instruments - Yeehing Electronics

Rail-to-Rail Output Wide-Input-Voltage Micropower Dual Op Amps

Pricing (USD)

Quantity	Unit Price
1 — 99	1.944
100 — 249	1.606
250 — 999	1.154
1,000 +	0.61

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Operational Amplifiers - Op Amps
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	SOIC-8
Supply Voltage - Max	10 V
Output Current per Channel	50 mA
Number of Channels	2 Channel
GBP - Gain Bandwidth Product	52 kHz
SR - Slew Rate	0.02 V/us
CMRR - Common Mode Rejection Ratio	70 dB to 83 dB
Ib - Input Bias Current	60 pA
Vos - Input Offset Voltage	0.95 mV
Supply Voltage - Min	2.7 V
Operating Supply Current	50 uA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C
Shutdown	No Shutdown
Series	TLV2422A
Packaging	Tube
Amplifier Type	Micropower Amplifier
Height	1.58 mm
Input Type	Rail-to-Rail
Length	4.9 mm
Output Type	Rail-to-Rail
Product	Operational Amplifiers
Supply Type	Single, Dual
Technology	LinCMOS
Width	3.91 mm
Brand	Texas Instruments
Dual Supply Voltage	+/- 3 V
en - Input Voltage Noise Density	100 nV/sqrt Hz
In - Input Noise Current Density	0.0006 pA/sqrt Hz
Maximum Dual Supply Voltage	+/- 5 V
Minimum Dual Supply Voltage	+/- 1.35 V
Operating Supply Voltage	2.7 V to 10 V, +/- 1.35 V to +/- 5 V
Pd - Power Dissipation	725 mW
Product Type	Op Amps - Operational Amplifiers
Factory Pack Quantity	75
Subcategory	Amplifier ICs
Tradename	LinCMOS
Vcm - Common Mode Voltage	Negative Rail to Positive Rail - 0.5 V
Voltage Gain dB	120 dB
Unit Weight	0.002677 oz

For more information, please refer to datasheet

Documents

TLV2422AID Datasheet

More Information

The TLV2422 and TLV2422A are dual low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range for this device has been extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, the devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV2422 only requires 50 uA of supply current per channel, making it ideal for battery-powered applications. The TLV2422 also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.