Texas Instruments
TLV2432AIPWR
TLV2432AIPWR
Couldn't load pickup availability
TLV2432AIPWR Texas Instruments - Yeehing Electronics
Dual, 10-V, 500-kHz, low-offset operational amplifier
Pricing (USD)
| Quantity | Unit Price |
| 1 — 99 | 1.969 |
| 100 — 249 | 1.626 |
| 250 — 999 | 1.168 |
| 1,000 + | 0.62 |
The above prices are for reference only.
Specifications
| Manufacturer | Texas Instruments |
| Product Category | Operational Amplifiers - Op Amps |
| RoHS | Y |
| Mounting Style | SMD/SMT |
| Package / Case | TSSOP-8 |
| Supply Voltage - Max | 10 V |
| Output Current per Channel | 50 mA |
| Number of Channels | 2 Channel |
| GBP - Gain Bandwidth Product | 550 kHz |
| SR - Slew Rate | 0.25 V/us |
| CMRR - Common Mode Rejection Ratio | 70 dB to 83 dB |
| Ib - Input Bias Current | 60 pA |
| Vos - Input Offset Voltage | 0.95 mV |
| Supply Voltage - Min | 2.7 V |
| Operating Supply Current | 100 uA |
| Minimum Operating Temperature | - 40 C |
| Maximum Operating Temperature | + 125 C |
| Shutdown | No Shutdown |
| Series | TLV2432A |
| Packaging | Reel |
| Amplifier Type | Low Power Amplifier |
| Height | 1.15 mm |
| Input Type | Rail-to-Rail |
| Length | 3 mm |
| Output Type | Rail-to-Rail |
| Product | Operational Amplifiers |
| Supply Type | Single, Dual |
| Technology | LinCMOS |
| Width | 4.4 mm |
| Brand | Texas Instruments |
| Dual Supply Voltage | +/- 3 V |
| en - Input Voltage Noise Density | 100 nV/sqrt Hz |
| In - Input Noise Current Density | 0.0006 pA/sqrt Hz |
| Maximum Dual Supply Voltage | +/- 5 V |
| Minimum Dual Supply Voltage | +/- 1.35 V |
| Operating Supply Voltage | 2.7 V to 10 V, +/- 1.35 V to +/- 5 V |
| Pd - Power Dissipation | 525 mW |
| Product Type | Op Amps - Operational Amplifiers |
| Factory Pack Quantity | 2000 |
| Subcategory | Amplifier ICs |
| Tradename | LinCMOS |
| Vcm - Common Mode Voltage | Negative Rail to Positive Rail - 0.5 V |
| Voltage Gain dB | 119.55 dB |
| Unit Weight | 0.001376 oz |
For more information, please refer to datasheet
Documents
| TLV2432AIPWR Datasheet |
More Information
The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 uA (typ) of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.
