TLV2432AQDG4 Texas Instruments - Yeehing Electronics

Dual, 10-V, 500-kHz, low-offset operational amplifier

Pricing (USD)

Quantity	Unit Price
1 — 99	2.198
100 — 249	1.926
250 — 999	1.35
1,000 +	0.87

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Operational Amplifiers - Op Amps
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	SOIC-8
Supply Voltage - Max	10 V
Output Current per Channel	50 mA
Number of Channels	2 Channel
GBP - Gain Bandwidth Product	550 kHz
SR - Slew Rate	0.25 V/us
CMRR - Common Mode Rejection Ratio	70 dB to 83 dB
Ib - Input Bias Current	60 pA
Vos - Input Offset Voltage	0.95 mV
Supply Voltage - Min	2.7 V
Operating Supply Current	100 uA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C
Shutdown	No Shutdown
Series	TLV2432A
Packaging	Tube
Amplifier Type	Low Power Amplifier
Height	1.58 mm
Input Type	Rail-to-Rail
Length	4.9 mm
Output Type	Rail-to-Rail
Product	Operational Amplifiers
Supply Type	Single, Dual
Technology	LinCMOS
Width	3.91 mm
Brand	Texas Instruments
Dual Supply Voltage	+/- 3 V
en - Input Voltage Noise Density	100 nV/sqrt Hz
In - Input Noise Current Density	0.0006 pA/sqrt Hz
Maximum Dual Supply Voltage	+/- 5 V
Minimum Dual Supply Voltage	+/- 1.35 V
Operating Supply Voltage	2.7 V to 10 V, +/- 1.35 V to +/- 5 V
Pd - Power Dissipation	725 mW
Product Type	Op Amps - Operational Amplifiers
Factory Pack Quantity	75
Subcategory	Amplifier ICs
Tradename	LinCMOS
Voltage Gain dB	119.55 dB
Unit Weight	0.002561 oz

For more information, please refer to datasheet

Documents

TLV2432AQDG4 Datasheet

More Information

The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 uA (typ) of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.