TLV2434CPW


YeeHing #: Y001-TLV2434CPW
Inventory: 2000

Feel free to reach out to us for more information.
Click the button below to unveil exclusive discounts and delightful surprises.

Description

TLV2434CPW Texas Instruments - Yeehing Electronics

Quad, 10-V, 500-kHz operational amplifier

Pricing (USD)

Quantity Unit Price
1 — 99 3.068
100 — 249 2.689
250 — 999 1.885
1,000 + 1.22

The above prices are for reference only.

Specifications

Manufacturer Texas Instruments
Product Category Operational Amplifiers - Op Amps
RoHS Y
Mounting Style SMD/SMT
Package / Case TSSOP-14
Supply Voltage - Max 10 V
Output Current per Channel 50 mA
Number of Channels 4 Channel
GBP - Gain Bandwidth Product 550 kHz
SR - Slew Rate 0.25 V/us
CMRR - Common Mode Rejection Ratio 70 dB to 83 dB
Ib - Input Bias Current 60 pA
Vos - Input Offset Voltage 2 mV
Supply Voltage - Min 2.7 V
Operating Supply Current 100 uA
Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C
Shutdown No Shutdown
Series TLV2434
Packaging Tube
Amplifier Type Low Power Amplifier
Height 1.15 mm
Input Type Rail-to-Rail
Length 5 mm
Output Type Rail-to-Rail
Product Operational Amplifiers
Supply Type Single, Dual
Technology LinCMOS
Width 4.4 mm
Brand Texas Instruments
Dual Supply Voltage +/- 3 V
en - Input Voltage Noise Density 100 nV/sqrt Hz
In - Input Noise Current Density 0.0006 pA/sqrt Hz
Maximum Dual Supply Voltage +/- 5 V
Minimum Dual Supply Voltage +/- 1.35 V
Operating Supply Voltage 2.7 V to 10 V, +/- 1.35 V to +/- 5 V
Pd - Power Dissipation 720 mW
Product Type Op Amps - Operational Amplifiers
Factory Pack Quantity 90
Subcategory Amplifier ICs
Tradename LinCMOS
Vcm - Common Mode Voltage Negative Rail to Positive Rail - 0.5 V
Voltage Gain dB 119.55 dB
Unit Weight 0.002018 oz

For more information, please refer to datasheet

Documents

TLV2434CPW Datasheet

More Information

The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 uA (typ) of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.

You may also like

Recently viewed