Description
TLV2434IDR Texas Instruments - Yeehing Electronics
Quad, 10-V, 500-kHz operational amplifier
Pricing (USD)
Quantity | Unit Price |
1 — 99 | 2.273 |
100 — 249 | 1.991 |
250 — 999 | 1.396 |
1,000 + | 0.90 |
The above prices are for reference only.
Specifications
Manufacturer | Texas Instruments |
Product Category | Operational Amplifiers - Op Amps |
RoHS | Y |
Mounting Style | SMD/SMT |
Package / Case | SOIC-14 |
Supply Voltage - Max | 10 V |
Output Current per Channel | 50 mA |
Number of Channels | 4 Channel |
GBP - Gain Bandwidth Product | 550 kHz |
SR - Slew Rate | 0.25 V/us |
CMRR - Common Mode Rejection Ratio | 70 dB to 83 dB |
Ib - Input Bias Current | 60 pA |
Vos - Input Offset Voltage | 2 mV |
Supply Voltage - Min | 2.7 V |
Operating Supply Current | 100 uA |
Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C |
Shutdown | No Shutdown |
Series | TLV2434 |
Packaging | Reel |
Amplifier Type | Low Power Amplifier |
Height | 1.58 mm |
Input Type | Rail-to-Rail |
Length | 8.65 mm |
Output Type | Rail-to-Rail |
Product | Operational Amplifiers |
Supply Type | Single, Dual |
Technology | LinCMOS |
Width | 3.91 mm |
Brand | Texas Instruments |
Dual Supply Voltage | +/- 3 V |
en - Input Voltage Noise Density | 100 nV/sqrt Hz |
In - Input Noise Current Density | 0.0006 pA/sqrt Hz |
Maximum Dual Supply Voltage | +/- 5 V |
Minimum Dual Supply Voltage | +/- 1.35 V |
Operating Supply Voltage | 2.7 V to 10 V, +/- 1.35 V to +/- 5 V |
Pd - Power Dissipation | 1022 mW |
Product Type | Op Amps - Operational Amplifiers |
Factory Pack Quantity | 2500 |
Subcategory | Amplifier ICs |
Tradename | LinCMOS |
Vcm - Common Mode Voltage | Negative Rail to Positive Rail - 0.5 V |
Voltage Gain dB | 119.55 dB |
Unit Weight | 0.004706 oz |
For more information, please refer to datasheet
Documents
TLV2434IDR Datasheet |
More Information
The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 uA (typ) of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.