TLV2444AIPW Texas Instruments - Yeehing Electronics

Advanced LinCMOS™ rail-to-rail output wide-input-voltage quad precision op amp

Pricing (USD)

Quantity	Unit Price
1 — 99	3.379
100 — 249	2.961
250 — 999	2.076
1,000 +	1.17

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Operational Amplifiers - Op Amps
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	TSSOP-14
Supply Voltage - Max	10 V
Output Current per Channel	50 mA
Number of Channels	4 Channel
GBP - Gain Bandwidth Product	1.81 MHz
SR - Slew Rate	1.4 V/us
CMRR - Common Mode Rejection Ratio	70 dB to 75 dB
Ib - Input Bias Current	60 pA
Vos - Input Offset Voltage	0.95 mV
Supply Voltage - Min	2.7 V
Operating Supply Current	750 uA
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C
Shutdown	No Shutdown
Series	TLV2444A
Packaging	Reel
Amplifier Type	Low Power Amplifier
Height	1.15 mm
Input Type	Rail-to-Rail
Length	5 mm
Output Type	Rail-to-Rail
Product	Operational Amplifiers
Supply Type	Single, Dual
Technology	LinCMOS
Width	4.4 mm
Brand	Texas Instruments
Dual Supply Voltage	+/- 3 V
en - Input Voltage Noise Density	130 nV/sqrt Hz
In - Input Noise Current Density	0.0006 pA/sqrt Hz
Maximum Dual Supply Voltage	+/- 5 V
Minimum Dual Supply Voltage	+/- 1.35 V
Operating Supply Voltage	2.7 V to 10 V, +/- 1.35 V to +/- 5 V
Pd - Power Dissipation	720 mW
Product Type	Op Amps - Operational Amplifiers
Factory Pack Quantity	2000
Subcategory	Amplifier ICs
Tradename	LinCMOS
Vcm - Common Mode Voltage	Negative Rail to Positive Rail - 0.75 V
Voltage Gain dB	119.55 dB
Unit Weight	0.002018 oz

For more information, please refer to datasheet

Documents

TLV2444AIPW Datasheet

More Information

The TLV244x and TLV244xA are low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range of these devices has been extended over typical standard CMOS amplifiers, making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. Both devices offer comparable ac performance while having lower noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLV244x has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecommunications applications.