Description
TLV2444AIPWR Texas Instruments - Yeehing Electronics
Advanced LinCMOS™ rail-to-rail output wide-input-voltage quad precision op amp
Pricing (USD)
Quantity | Unit Price |
1 — 99 | 2.86 |
100 — 249 | 2.506 |
250 — 999 | 1.757 |
1,000 + | 1.13 |
The above prices are for reference only.
Specifications
Manufacturer | Texas Instruments |
Product Category | Operational Amplifiers - Op Amps |
RoHS | Y |
Mounting Style | SMD/SMT |
Package / Case | TSSOP-14 |
Supply Voltage - Max | 10 V |
Output Current per Channel | 50 mA |
Number of Channels | 4 Channel |
GBP - Gain Bandwidth Product | 1.81 MHz |
SR - Slew Rate | 1.4 V/us |
CMRR - Common Mode Rejection Ratio | 70 dB to 75 dB |
Ib - Input Bias Current | 60 pA |
Vos - Input Offset Voltage | 0.95 mV |
Supply Voltage - Min | 2.7 V |
Operating Supply Current | 750 uA |
Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 125 C |
Shutdown | No Shutdown |
Series | TLV2444A |
Packaging | Reel |
Amplifier Type | Low Power Amplifier |
Height | 1.15 mm |
Input Type | Rail-to-Rail |
Length | 5 mm |
Output Type | Rail-to-Rail |
Product | Operational Amplifiers |
Supply Type | Single, Dual |
Technology | LinCMOS |
Width | 4.4 mm |
Brand | Texas Instruments |
Dual Supply Voltage | +/- 3 V |
en - Input Voltage Noise Density | 130 nV/sqrt Hz |
In - Input Noise Current Density | 0.0006 pA/sqrt Hz |
Maximum Dual Supply Voltage | +/- 5 V |
Minimum Dual Supply Voltage | +/- 1.35 V |
Operating Supply Voltage | 2.7 V to 10 V, +/- 1.35 V to +/- 5 V |
Pd - Power Dissipation | 720 mW |
Product Type | Op Amps - Operational Amplifiers |
Factory Pack Quantity | 2000 |
Subcategory | Amplifier ICs |
Tradename | LinCMOS |
Vcm - Common Mode Voltage | Negative Rail to Positive Rail - 0.75 V |
Voltage Gain dB | 119.55 dB |
Unit Weight | 0.002018 oz |
For more information, please refer to datasheet
Documents
TLV2444AIPWR Datasheet |
More Information
The TLV244x and TLV244xA are low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range of these devices has been extended over typical standard CMOS amplifiers, making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. Both devices offer comparable ac performance while having lower noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLV244x has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecommunications applications.