Description
TLV2548IDW Texas Instruments - Yeehing Electronics
12-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch.
Pricing (USD)
Quantity | Unit Price |
1 — 99 | 9.701 |
100 — 249 | 8.474 |
250 — 999 | 6.534 |
1,000 + | 4.68 |
The above prices are for reference only.
Specifications
Manufacturer | Texas Instruments |
Product Category | Analog to Digital Converters - ADC |
RoHS | Y |
Series | TLV2548 |
Mounting Style | SMD/SMT |
Package / Case | SOIC-20 |
Resolution | 12 bit |
Number of Channels | 8 Channel |
Sampling Rate | 200 kS/s |
Input Type | Single-Ended |
Interface Type | SPI |
Architecture | SAR |
Reference Type | External, Internal |
Analog Supply Voltage | 2.7 V to 5.5 V |
Digital Supply Voltage | 2.7 V to 5.5 V |
SNR - Signal to Noise Ratio | 75 dB |
Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C |
Packaging | Tube |
Features | Oscillator |
Height | 2.35 mm |
Length | 12.8 mm |
Number of Converters | 1 Converter |
Power Consumption | 3.3 mW |
Width | 7.52 mm |
Brand | Texas Instruments |
DNL - Differential Nonlinearity | +/- 1 LSB |
INL - Integral Nonlinearity | +/- 1 LSB |
Operating Supply Voltage | 2.7 V to 5.5 V |
Pd - Power Dissipation | 1294 mW |
Product Type | ADCs - Analog to Digital Converters |
SINAD - Signal to Noise and Distortion Ratio | 70 dB |
Factory Pack Quantity | 25 |
Subcategory | Data Converter ICs |
Unit Weight | 0.018953 oz |
For more information, please refer to datasheet
Documents
TLV2548IDW Datasheet |
More Information
The TLV2548 and TLV2544 are a family of high performance, 12-bit low power, 3.86 µs, CMOS analog-to-digital converters (ADC) which operate from a single 2.7-V to 5.5-V power supply. These devices have three digital inputs and a 3-state output [chip select (CS), serial input-output clock (SCLK), serial data input (SDI), and serial data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a TI DSP, a frame sync (FS) signal is used to indicate the start of a serial data frame.