TPS56100PWP Texas Instruments - Yeehing Electronics

5 Bit Programmable Synchronous Buck Controller

Pricing (USD)

Quantity	Unit Price
1 — 99	9.494
100 — 249	7.74
250 — 999	6.084
1,000 +	3.61

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Switching Controllers
RoHS	Y
Number of Outputs	1 Output
Input Voltage	4.5 V to 6 V
Output Current	3 A to 30 A
Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 125 C
Mounting Style	SMD/SMT
Package / Case	HTSSOP-28
Packaging	Tube
Series	TPS56100
Type	Synchronous Buck Controller
Brand	Texas Instruments
Moisture Sensitive	Yes
Product Type	Switching Controllers
Factory Pack Quantity	50
Subcategory	PMIC - Power Management ICs
Unit Weight	0.004180 oz

For more information, please refer to datasheet

Documents

TPS56100PWP Datasheet

More Information

The TPS56100 is a high-efficiency synchronous-buck regulator controller which provides an accurate programmable supply voltage to low-voltage digital signal processors, such as the `C6x and `C54x DSPs. An internal 5-bit DAC is used to program the reference voltage from 1.3 V to 2.6 V. Higher output voltages can be implemented using an external input resistive divider. The TPS56100 uses a fast hysteretic control method that provides a quick transient response. The propagation delay from the comparator input to the output driver is less than 300 ns, even at maximum output current. Overcurrent shutdown and crossover protection combine to eliminate destructive faults in the output MOSFETs, thereby protecting the processor during operation. The slowstart current source is proportional to the reference voltage, thereby eliminating variation of the slowstart timing when changes are made to the output voltage. When the output drops to less than 93% of the nominal output voltage, PWRGD will pull the open-drain output low. The overvoltage circuit will disable the output drivers if the output voltage rises more than 15% above the nominal output voltage. The TPS56100 also includes an inhibit input to control power sequencing and undervoltage lockout thereby insuring the 5-V supply is within limits before the controller starts. The 2-A MOSFET drivers can power multiple MOSFETs in parallel to drive single or multiple DSPs and load currents up to 30 A. The high-side driver can be configured as a ground-referenced driver or as a floating bootstrap driver with the included internal bootstrap Schottky diode.