TPS61026DRCT


YeeHing #: Y012-TPS61026DRCT
Inventory: 5400

Feel free to reach out to us for more information.
Click the button below to unveil exclusive discounts and delightful surprises.

Description

TPS61026DRCT Texas Instruments - Yeehing Electronics

5.0-V Output, 1.8-A Switch, 96% Efficient Boost Converter w/ LDO Down-Mode, QFN-10

Pricing (USD)

Quantity Unit Price
1 — 99 2.213
100 — 249 1.828
250 — 999 1.313
1,000 + 0.79

The above prices are for reference only.

Specifications

Manufacturer Texas Instruments
Product Category Switching Voltage Regulators
RoHS Y
Mounting Style SMD/SMT
Package / Case VSON-10
Output Voltage 5 V
Output Current 1.8 A
Number of Outputs 1 Output
Input Voltage MAX 6.5 V
Topology Boost
Input Voltage MIN 0.9 V
Switching Frequency 600 kHz
Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C
Series TPS61026
Packaging Reel
Input Voltage 0.9 V to 6.5 V
Operating Temperature Range - 40 C to + 85 C
Product Voltage Regulators
Type Voltage Converter
Brand Texas Instruments
Moisture Sensitive Yes
Operating Supply Current 25 uA
Product Type Switching Voltage Regulators
Factory Pack Quantity 250
Subcategory PMIC - Power Management ICs
Unit Weight 0.000921 oz

For more information, please refer to datasheet

Documents

TPS61026DRCT Datasheet

More Information

The TPS6102x family of devices provide a power supply solution for products powered by either a one-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 200 mA while using a single-cell alkaline battery, and discharge it down to 0.9 V. The device can also be used for generating 5 V at 500 mA from a 3.3-V rail or a Li-Ion battery. The boost converter is based on a fixed-frequency, pulse width modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters the power save mode to maintain a high efficiency over a wide-load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum peak current in the boost switch is limited to a value of 800 mA, 1500 mA, or 1800 mA depending on the version of the device.

You may also like

Recently viewed