TPS61031PWP Texas Instruments - Yeehing Electronics

3.3-V Output, 1-A, 96% Efficient Boost Converter w/20uA Iq in TSSOP-16

Pricing (USD)

Quantity	Unit Price
1 — 99	2.699
100 — 249	2.365
250 — 999	1.658
1,000 +	0.94

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Switching Voltage Regulators
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	HTSSOP-16
Output Voltage	3.3 V
Output Current	4 A
Number of Outputs	1 Output
Input Voltage MAX	5.5 V
Topology	Boost
Input Voltage MIN	1.8 V
Switching Frequency	600 kHz
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C
Series	TPS61031
Packaging	Tube
Input Voltage	1.8 V to 5.5 V
Operating Temperature Range	- 40 C to + 85 C
Product	Switching Regulators
Type	Power Switching Regulator
Brand	Texas Instruments
Development Kit	TPS61031EVM-208
Load Regulation	0.6 %
Moisture Sensitive	Yes
Operating Supply Current	20 uA
Product Type	Switching Voltage Regulators
Factory Pack Quantity	90
Subcategory	PMIC - Power Management ICs
Unit Weight	0.002212 oz

For more information, please refer to datasheet

Documents

TPS61031PWP Datasheet

More Information

The TPS6103x devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 1 A at 5 V at a supply voltage down to 1.8 V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin. The maximum peak current in the boost switch is limited to a value of 4500 mA.