TPS63060MDSCTEP Texas Instruments - Yeehing Electronics

HIGH INPUT VOLTAGE BUCK-BOOST CONVERTER WITH 2-A SWITCH CURRENT

Pricing (USD)

Quantity	Unit Price
1 — 99	9.298
100 — 249	7.58
250 — 999	5.957
1,000 +	4.04

The above prices are for reference only.

Specifications

Manufacturer	Texas Instruments
Product Category	Switching Voltage Regulators
RoHS	Y
Mounting Style	SMD/SMT
Package / Case	WSON-10
Output Current	2.25 A
Minimum Operating Temperature	- 55 C
Maximum Operating Temperature	+ 125 C
Series	TPS63060-EP
Packaging	Reel
Operating Temperature Range	- 55 C to + 125 C
Brand	Texas Instruments
Moisture Sensitive	Yes
Operating Supply Current	30 uA
Product Type	Switching Voltage Regulators
Factory Pack Quantity	250
Subcategory	PMIC - Power Management ICs
Part # Aliases	V62/14602-01XE
Unit Weight	0.000769 oz

For more information, please refer to datasheet

Documents

TPS63060MDSCTEP Datasheet

More Information

The TPS63060 provides a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2A while using a dual-cell Li-Ion or Li-Polymer Battery, and discharge it down to 5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin SON PowerPAD package measuring 3mm × 3mm (DSC).